Universal DC 12V Rearview Mirror Heated Quick Warm Defogger Remove Rain Frost Safe Driving Car Mirror Heating Pad
Specification:
Votage: DC 12 V
Power: About 26W Total
Heating Pad Size: Approx. 15CM x 12CM
Color: As Picture Shown
Fitment:
Fit for most DC 12V car,Confirm your mirror size.
Note: Usually takes 3~5 minutes to fully defogger ,It depends difference whether
How To Install:
1. Remove the mirror glass from your car carefully
2. Stick this product on the back of mirror glass
3. Connect the wires and put the glass back
4. Turn on switch,done
Package List:
2 x Heating Pad
1 x Wire Cable
1 x Fuse Tube
1 x Switch
1 x Double-sided Adhesive
Y***k –
The order came quickly. in the set of 2 warming Christmas trees, with a resistance of 10 ohms. 3 meters of wire. 1 button and 1 pridokeeper.
AliExpress Shopper –
Took for Seat Altea XL. A little had to cut around the edges and drill a hole for one contact. At 3 and 4 photos measured resistance. The meanings are different that is not good…
S***v –
Got it, all as in the description. The size is big. Between the contacts distance 2 cm, I did not fit, I have 1 cm. We have to make a hole. The last photo is visible what I have and what I have.
S***y –
Fast shipment and delivery to the Altai territory of the combined parcel. Complete set. I will install only in the spring. Now we have frosts under minus 20. Pre-tested track resistance and performance. Very large run between 2 stickers with heating. Accordingly, the temperature varies. Where less resistance, there and heating temperature is larger. The result is on the photo. You have to put a smaller resistance on the passenger side. Plus limit voltage through the diode. Due to the resistance of conductors to the sticker and a small voltage limitation with the diode, the temperature on the heating will decrease. On the driver’s side, there are no improvements. And then at 50 can burst the mirror. It is in winter. Summer will go. In principle, these stickers can be put safely. After all, buying kits from a mirror and heating is much more expensive. Product and seller recommend.
A***r –
November 9 shipped, December 7 received. It’s all good. I put a white adhesive tape as a gift, I don’t know why it is, but thank you! Resistance of 18 and 19 ohMs, which is about 10 watts of power.
4***r –
Came the whole, until Chelyabinsk from China month, I take it not for the first time, thanks to the seller, I recommend it.
R***d –
Looking normal. on hover just right. Only received not yet put!!!
O***r –
Delivery to CBR 38 days. I will not leave a moronic review, I have received the type of product, everything is beautiful, everything is consistent, but not connected yet. I will simply post a photo with the measurement of the resistance of the heaters separately and together connected by a wire from the parcel. Very well approached the pump and buttons on the steering wheel.
А***н –
Item as described. The quality is excellent. The contacts on the heating pads are filled with a glue gun, caprom. There are terminals on the wires for connection. 3.5 meter wire. Adhesive tape, white, 1 meter. Three-contact switch with indicator. Resistance of the right element 24 Ohm, the left 19 Ohm. The heating temperature in parallel connection is more than 40 °. Delivered to Chelyabinsk 12 days in advance, which is 19 days earlier than the specified date. Thank you very much. I recommend the seller.
I***n –
Installed according to the instructions from YouTube, everything works perfectly, fogging quickly, even frozen mirrors, connected to the rear window heating