Car Windshield Repair Tool DIY Window Repair Tools Windscreen Glass Scratch Crack Restore Window Screen resin+blade+strips

Note:

Before buying, please confirm whether the crack of your car windshield is damaged on the outer layer (touch the windshield outside the car with your hand, if you feel burrs, support repair)

The black and the white color are the same.Just the color of the bottle is different.

Features:

100% Brand new and high quality!

Easy to use and operate, convenient for carrying and storage.

Save you lots of cost and time to buy a piece of new glass.

Practical car glass repair tool kit for all wise car owners.

Allow you to cure and repair various kinds of damage caused by traffic accidents, impact, collisions, bump.

Package included:

1 x repair resin

5 x curing strips

1 x sleeved razor blade

Note:

1. Once the damage occurs, cover the area with transparent adhesive tape to prevent moisture and dirt from entering the damaged area.   2. Damage should be repaired as soon as possible to prevent the spread of small cracks.

3. The ideal applying temperature is 60℉ to 90℉(15℃ to 32℃). The glue will be dried under the UV light,if you have no the UV light,please do the repair operation under the sunshine.

4. The surface must be clean and dry for proper repair.

5. Do not expose the glue if there is no need to use.

Quick glass repair solution

Easy solution to your glass crack problem
products include : 2ml Windshield repair fluid piece curing film and a razor blade
You can choose a white bottle or a black bottle

Novice also can repair

Use water and paper towelsClean up cracks
Open the solution and gently pour into the crack,Affx curing film
Next, just wait for the sun to help solidify the solution

Easy to use – takes only minutes

Repairs all types of laminated windshields
Good for multiple repairs

STEP 1
Very slowly repair resin on the crackStart from one end Of the crack,and repair resin only as fast as the is
disappearing 3 seconds a centimeter.LOOk at the from a 45 degree angle to see the shad or dark area filling With repair resinBe
patient.allow the resin to be into the crack After 5 to 10 minutes,if air remain in the a small arnount Of pressure
from the inside of the windshield,to both sides and center of the crack.This will force the air out of the crack-pressure should be appli«i carefully
and sparingly;excessive pressure will extend the crackÆxamine the repaired area from tx)th sides at a 45 degree angle to if any parts of the
crack are still visible.Repeat as necessary,disrnsing more repair resin and gently pressure from behind until no dark areas are visible.
• Apply resin to crack

STEP2
After all the air has the repair resin to length Of the curing strips on covered areas as you sure
not to leave any air pockets under the curing strips. When applying the curing strips,no pressure is place the strips on the
glass. When the entire application pr«xedure is the direct sunlight Or use an ultraviolet light-Allow repair
resin the crack to cure completely(about 5 to 10 minutes).When removing the curing strips,the repair resin must dried.The Off the
hardened repair resin with the razor blade.Hold the razor blade at a angle to the glass scraping hard until the hardened resin comes off in
White flakes.
• Apply curing strips
• Move windshield into direct sunlight
• Wait
• Off excess resin